M1 /155 Diamond for the HJ knife

Joined
Sep 4, 2009
Messages
104
Thanks Received
1
Location
Noord Holland
How about this raute? Not easy to find :)
Should I insert it in this knife or leave them separate?
And if so how would I insert it?!?

You don't have permission to view attachments.
You don't have permission to view attachments.
You don't have permission to view attachments.
 

Attachments

    You don't have permission to view attachments.
In order to place it in the grip plates, you need to remove the rivets carefully and get some originals for replacement. Personally, I wouldn't do it as you also run the risk of damaging the plates, then you need to get some more of them. And you'll have a restored item, possibly losing some value either way with most likely, noticeable signs of replacement.

Regards

Russ
 
Hi i have inserted a daimond into position before by bringing to 2 prongs together as 1 prong then bend them slightly so you can push/wiggle the prong into the slotted hole & it should go up into place with a click when the daimond is finally fitted into the griplate. worked out fine for me without taking my knife to bits but its up to you to decide.
Regards Sweezz.
 
Back
Top